[User Guide] Amazon L5B83H 2nd Generation Fire Stick Streaming Remote Control

This article applies to the Amazon L5B83H, 2nd Gen fire stick remote control.

Compatible with: Fire TV Stick Lite, Fire TV Stick 2020 Release, Fire TV Stick (2nd Gen), Fire TV Stick 4K, Fire TV Cube (2nd Gen), Fire TV Cube (1st Gen), and Amazon Fire TV (3rd Gen, Pendant Design).

Not compatible with: Amazon Fire TV (1st and 2nd Gen), Fire TV Stick (1st Gen), or Amazon Fire TV Edition smart TVs.

Originally supplied with models: Fire TV 3rd Gen, Fire TV Cube 1st Gen, Fire TV Cube 2nd Gen, Fire TV Stick 2020 Release, Fire TV Stick 2nd Gen, Fire TV Stick 4K

Paring the Remote:

Press the Home button for 8-30 seconds until the LED starts to rapidly flash amber. Then the remote should automatically pair with your device.

Reset Your Remote:

If you're having trouble with your remote, first remove and reinsert the new alkaline batteries. Then reset your remote as follows:

Place your remote within 10 feet of your Fire TV device.

  1. Press the Left, Menu, and Back buttons simultaneously, and hold for 10 seconds.
  2. Wait for 60 seconds.
  3. Remove the batteries from your remote, unplug your Fire TV device, and wait 60 seconds.
  4. Plug your Fire TV device back in, and wait for the Home Screen to display.
  5. Hold the Home button on your remote for 40 seconds, then wait 60 seconds for setup to complete.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.