ANDERIC RRTX015, A25-TX015A | Anderic Ceiling Fan Remote Control for Harbor Breeze User Guide

Product Features

The Anderic RRTX015, a precise replacement remote designed for ceiling fans originally supplied with the Harbor Breeze A25-TX015 remote. Works with both the 44 Inch and 52 Inch Harbor Breeze Sailstream LED Ceiling Fans. The RRTX015 provides full control over fan speed with high, medium, low, and off settings. It also allows for forward and reverse fan direction changes, helping optimize airflow throughout the seasons. Light control includes standard on/off, dimming capability, and a timer function for added convenience.

Please note: This remote only replaces units marked A25-TX015. It is not compatible with “KUJCE…” or “TR…” model remotes. Be sure to check the FCC ID on your original remote before purchasing.

What’s Included:

Anderic RRTX015 Remote Control
Wall Mount Bracket
Setup Instructions

Pairs with receivers:

Harbor Breeze AH-3TRDL Learning Ceiling Fan Receiver
Harbor Breeze AH-3TRD Learning Ceiling Fan Receiver

Pairing Instructions

Install a 12V battery (not included) into the transmitter, matching polarity.
Cycle the power to the fan using either the wall switch or the circuit breaker box, and within 30 seconds of restoring the power to the fan,
Press and hold the "HI" and "LOW" buttons for 5 seconds, then
Tap the "LEARN" key on the back of the transmitter. (See FIG 2.)

Indication of successful pairing: the fan will turn to LOW speed, and incandescent/CFL is OFF.

If the fan does not respond, try pressing the keys on the remote to see if it will operate. If not, try repeating the steps above.

Operating the Remote (See Fig 1 & 2)

See the key function descriptions below. Please review the images below.

① Press to toggle the fan speeds to LOW.
② Press to toggle the fan speeds to MEDIUM.
③: Press to toggle the fan speeds to HIGH.
④: Press to turn the fan OFF.
⑤: LIGHT DELAY OFF - Press to turn on the light delay: Pressing this enters the light delay-off mode; press the Light On/Off key to exit.
⑥: LIGHT ON/OFF/DIMMING:
- Press and release immediately to turn the light ON/OFF.
- Press and hold to achieve the dimming function.
⑦: SEASON FORWARD / REVERSE SWITCH - Slide the switch depending on the direction you wish the air to flow. Note: Wait for the fan to stop before reversing the switch.
- In warmer weather, counterclockwise rotation creates a downward airflow, which cools the air—slide the switch to the left, indicated by the ↓↓↓ icon.
- In cooler weather, the clockwise rotation of hot air from the ceiling into the room. Slide the switch right, indicated by the ↰↑↱ icon.
  
  ⑧: D/CFL SWITCH
  
  Slide the switch on the back of the transmitter depending on the light bulbs installed. You have the option of dimmable or non-dimmable light bulbs:
- For Dimmable bulbs, such as dimmable LED and Incandescent:
  - Set the switch to the left, labeled with the "D" marking.
- For non-dimmable bulbs, such as CFL bulbs:
  - Set the switch to the right, labeled with the "CFL" marking - this will disable the remote from dimming capabilities.
⑨: LEARN key: This key is used when pairing the remote.

Installing the wall mount bracket

Find a convenient mounting location. Use two screws to secure the wall mount bracket in place. (See fig. 3)

KNOWN COMPATIBLE MODELS

Harbor Breeze Item # 2758994 | Model # 42238 Sailstream 44-in Brushed Nickel LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 2758995 | Model # 42239 Sailstream 44-in Matte Black LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 915379 | Model # 41120 Sailstream 44-in White LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 2758993 | Model # 42237 Sailstream 52-in Bronze LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 2758991 | Model # 42235 Sailstream 52-in Matte Black LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 2758992 | Model # 42236 Sailstream 52-in White LED Flush Mount Ceiling Fan With Light
Harbor Breeze Item # 1133114 | Model # 41695 Sailstream 52-in Brushed Nickel LED Flush Mount Ceiling Fan With Light

TROUBLESHOOTING

ATTENTION: Must not be used with undimmable loads (e.g., CFL) when the transmitter is in D (incandescent dimming) mode. It will substantially shorten the CFL's working life and may even damage the controller.

Anderic® is a registered trademark of Dan's Electronics Etc., Inc.