[User Guide] Anderic RR1DTV 1-Device TV Universal Remote Control

The Anderic RR1DTV remote control is a basic TV-only remote for smart TVs. Please note that this remote is an infrared remote and requires a direct line of sight to operate. It does not have functions such as voice control, cursor, or remote finder.

Please take note of the following text:

Pre-programmed information: By default, the RR1DTV is pre-programmed using rolling code technology to work with LG, Samsung, Sony, Philips, Panasonic, and Sharp TVs. However, we recommend programming it using the steps below before use, as the rolling code technology is less responsive.

Easy One-key programming

Turn on the TV. Press and hold the button of the corresponding brand for 5 seconds. The LED will flash three times, indicating that the setting is complete.
Try most keys to see if your TV responds as it should. If you are not happy with it, try repeating step one; this will update the code to another.

How to set up your remote (via Code)

To program your remote, press and hold the MUTE and POWER buttons together for 3 seconds until the LED light comes on, then release the buttons.
Next, enter the 3-digit TV code from the list below. If you enter the correct code, the LED light will turn off. If the light stays on, the code entered may be incorrect. Please try entering the code again in case of an error.
After entering the correct code, test the remote functions. If they do not work properly, repeat the steps with a new code.

BRAND	CODES
LG	023, 001, 024, 025, 026, 027
SAMSUNG	028, 002, 030, 029, 031, 032
SONY	033, 003, 034
PHILIPS	005, 004, 038, 039, 040, 041, 035, 036, 037
PANASONIC	006, 042, 043, 044
SHARP	045, 007, 046, 047, 048, 049, 050, 058, 057, 056, 055, 054, 053, 052, 051
TOSHIBA	059, 008, 060, 061, 062, 063, 064, 065, 066
HITACHI	009, 067
VIZIO	068, 010, 069, 070, 071, 072
TCL	011, 073, 075, 074, 076
JVC	012, 077, 079, 078, 080, 081
HISENSE	013, 014, 049, 050, 058, 057, 056, 055, 054, 053, 052, 051
VESTEL	015
SEIKI	016
SANYO	017
INSIGNIA	018
MAGNAVOX	021, 035, 036, 037
RCA	019
HAIER	020
WESTINGHOUSE	022

Factory Reset

Hold the OK and zero keys for about three seconds; the LED will blink four times to confirm.

Additional information