[User Guide] Anderic FAN30R Ceiling Fan Receiver Installation Instructions

This article applies to the Anderic FAN30R ceiling fan Receiver, the Anderic FAN35T ceiling fan remote control, and the Anderic FAN35T/FAN30R Ceiling Fan Remote Control Kit.

Installing the receiver

• Remove the Motor housing on your ceiling fan
• Unscrew the receiver and unplug the nine-pin plug
• Place FAN30R above the motor
• Plug in the nine-pin on the FAN30R
• Screw down FAN30R to secure Receiver

Pairing Instructions

Setting the code on the remote 

1. Remove the battery cover. 
2. Slide the code switches to your choice of up or down position (factory setting is all up). 

Setting the code on the receiver (Fig. 3): 

1. Turn the fan's power off. 
2. Return power to the fan. 
3. Within 30 seconds of returning power to the fan, on the remote, hold the LEARN key for a minimum of 3 seconds. The light on the front of the remote should blink twice to confirm that the receiver learned the code. 
4. Replace the battery cover on the remote.